+90 444 2 184 12 Main Street Pt. Hamburg Germany

Demulsifier Para 1603

The demulsifier “Para 1603” is intended for the destruction of water-oil emulsions in the preparation of oil in the fields and refineries. It is a solution of the product obtained by the alcoholate polymerization of ethylene oxide on a condensed alkylphenol in an alcohol-aromatic solvent or toluene. The demulsifier “Para 1603” is produced in three grades A, B and C in accordance with the current technical specifications TU 38.401-58-295-2001 with amend. 1, 2, 3, 4, 5.

Used in services

Protection of technological equipment for the processing of hydrocarbon raw materials,

Application

The demulsifier “Para1603” is constantly fed into the preparation system through a dosing pump directly from drums or from reagent containers. Entering the demulsifier is possible at the intake of the raw pump.

Dosage

The dosage of the demulsifier “Para 1603” depends on the specific requirements for the dehydration of the raw material and on the stability of the emulsions. Typical dosages of the reagent can be considered 1 – 4 grams of demulsifier per ton of oil for refineries and 5-30 grams per ton of oil for oil producing enterprises.

physical and chemical indicatorsGrade AMark BGrade C
Appearancehomogeneous transparent liquid from light yellow to brownhomogeneous transparent liquid from light yellow to brownhomogeneous transparent liquid from light yellow to brown
Kinematic viscosity at 20оС, mm2/s, no moreone hundredone hundredone hundred
Mass fraction of dry residue, %, not less than242424
Pour point, С, not higherminus 50minus 50minus 50