+90 444 2 184 Polat Tower Basın Ekspress, Istanbul Turkey

Absorber of hydrogen sulfide and mercaptans Paragroup PM1775

The absorber of hydrogen sulfide and mercaptans “PARAGROUP PM 1775” is a water-alcohol solution of substituted propionaldehyde. The absorber is designed to bind hydrogen sulfide and acidic mercaptans in oil and oil products, including gas condensate and residual oil products, as well as in gas and water environments at oil, gas, gas condensate production plants and at oil refineries, as well as at points of transshipment of oil products and crude oil in ports.

The absorber ” PARAGROUP PM 1775 ” PM 1775″ is produced in two grades A and B in accordance with the current technical conditions TU 2633-067-17423242-2012.

Used in services

Fuel additives

Transportation of oil and oil products

Oil preparation

Application

In order to increase the contact time of the reagent with hydrogen sulfide and mercaptans, “PARAGRUP PM 1775” should be supplied as early as possible to the system with the processed product. The supply of the hydrogen sulfide absorber must be carried out using dosing pumps. However, in any case, intensive mixing of the reagent with the oil product must be ensured.

Dosage

The efficiency of the introduction of the absorber of hydrogen sulfide and mercaptans ” PARAGRUP PM 1775″ depends on the degree of distribution of the reagent in the medium of the processed product. This is especially important for viscous oil products (fuel oil, boiler fuels). Heating such oil products to 70-90C before adding the additive significantly improves the effect of the absorber. Depending on the specific conditions of use, the dosage of the absorber can vary from 4 to 8 g per 1 g of hydrogen sulfide. 

physical and chemical indicators Brand A Brand B
Appearance colorless to yellow liquid colorless to yellow liquid
Density, at 20 ° С, g / cm3 1,000 – 1,140 1,080 – 1,210
Pour point, ° С, not higher minus 45 minus 20