+90 444 2 184 12 Main Street Pt. Hamburg Germany

Hydrogen sulfide absorber Paragroup PS1822

The absorber of hydrogen sulfide “Paragroup PS 1822” is a specially selected composition of condensation products of amines and aldehydes of various concentrations in an alcoholic or aromatic solvent. The absorber is designed for binding hydrogen sulfide in oil, oil products, gas condensate. 

The hydrogen sulfide absorber ” Paragroup PS 1822″ is produced in four grades K, A, M, C in accordance with the current technical conditions TU 2458-009-26913347-2014.

Used in services

Fuel additives

Oil preparation

Application

The efficiency of entering the absorber “Paragroup PS 1822” depends on the degree of distribution of the reagent in the oil product environment. This is especially important for viscous oil products (fuel oil, boiler fuels). Heating such oil products to 70-800C before adding the additive significantly improves the effect of the absorber.

The dosage of the absorber can vary from 5 to 8 g per 1 g of hydrogen sulfide. 

Dosage

The absorber of hydrogen sulfide “Paragroup PS 1822” is used in the processes of oil and gas production and treatment, at oil refineries, at points of transshipment of oil and oil products. 

The hydrogen sulfide absorber ” Paragroup PS 1822″ should be supplied as early as possible to the oil and oil product collection or processing system in order to increase the contact time of the reagent with hydrogen sulfide. The introduction of the reagent can be carried out both continuously using dosing devices and periodically. However, in any case, intensive mixing of the reagent with oil and oil product must be ensured.

physical and chemical indicatorsGrade KBrand ABrand MBrand C
Appearancecolorless to yellow liquid with a characteristic odor. Opalescence is acceptablecolorless to yellow liquid with a characteristic odor. Opalescence is acceptablecolorless to yellow liquid with a characteristic odor. Opalescence is acceptablecolorless to yellow liquid with a characteristic odor. Opalescence is acceptable
Density at 20 ° С, g / cm30.850 – 0.9900.850 – 0.9900.800 – 0.9400.800 – 0.940
Pour point, ° С, not higherMinus 5Minus 20Minus 40Minus 30