+90 444 2 184 Polat Tower Basın Ekspress, Istanbul Turkey

Scale Inhibitor Para 2152

Scale inhibitor “PARA 2152” is designed for complex protection of oilfield equipment from calcium sulfate and calcium carbonate deposits in conditions of high salinity of produced waters.

Scale inhibitor “PARA 2152” is intended for:

  • effective prevention of sedimentation of salts of different chemical composition at all stages of production, transport and treatment of oil
  • protection of wells, deep and surface oilfield equipment in conditions of high salinity of produced waters.

Scale inhibitor “PARA 2151” is a balanced composition based on phosphonic acid derivatives in water and/or alcohols, produced in three grades A1, A2, A3 depending on the area and conditions of use in accordance with TU 2458-036-26913347-2016.

Used in services

Protection of equipment of water circulation systems

Application

Continuous dosing or intermittent treatment at GZU, wells, at the inlet of oil treatment plants, preliminary discharge, pressure maintenance system.

Dosage

The optimal dosage is established based on the results of pilot tests at the facility.

To achieve the maximum economic effect of using a scale inhibitor, it is recommended to conduct preliminary laboratory tests.

physical and chemical indicators Brand A1 Brand A2 Brand A3
Appearance Homogeneous transparent liquid from colorless to dark brown. Homogeneous transparent liquid from colorless to dark brown. Homogeneous transparent liquid from colorless to dark brown.
Density at 20 C, g/cm3 0.98±0.05 1.11±0.05 1.15±0.05
Pour point, 0С, not higher – 50 – 50 – 50
Kinematic viscosity, mm2/s, no more, at + 20 °С twenty twenty twenty
Kinematic viscosity, mm2/s, no more, at – 40 °С 500 500 500
Mass fraction of non-volatile substances (active substance),%, no more 15 15 15
Solubility and dispersibility in saline water/oil Soluble/dispersible Soluble/dispersible Soluble/dispersible
Efficiency of scale inhibition at 25 mg/dm3 inhibitor, %, not less 90 90 90
Corrosion aggressiveness of the commodity form, g/(m2*h), no more than, corrosion rate St3 at 20 0C for 6 hours for the stock of wells 0.089 0.089 0.089
Corrosion aggressiveness of the commodity form, g/(m2*h), no more than, corrosion rate St3 at 20 0C for 24 hours for other directions 0.125 0.125 0.125